The 12 point Chino Temperature Recorder has been chosen by Mannings as the standard recording instrument for on-site pre and post weld heat treatment.
Each recorder is contained within a rugged steel case to minimize wear and tear, with rear mounted thermocouple sockets for ease of connection and with a 2m, 110V a.c. power lead, with fitted three
pin 110V plug.
The standard scale supplied is 0 – 1200 degrees C, other scales can be provided on request.
Power supply and chart drive switches are accessible from the front of the recorder via a clear glass door.
Chart drive speed can be varied in 4 discrete steps to represent 12.5, 25, 50 or 100mm per hour by selecting the appropriate push button setting on the front panel.
A fast advance feature is also found on this panel.
With the chart drive speed set at 50mm per hour, each chart refill will last for approximately 360 hours.
A printed warning is visible on the right side of the chart 12 hours prior to a refill being required.
Each input is individually recorded on the chart paper using a multi coloured printing system.
The chart and the scale plate are illuminated by an integral strip light contained within the door assembly.